Square Flat-II
· Square Flat-II nonrotating, double acting cylinder provides the answer to applications where rotation cannot be tolerated.
· Nonrotation is achieved with dual piston rods and a rod end block that insures the rods work in tandem. Eliminates the need for external alignment devices. It also provides a convenient alternative for horizontal and side mounting, with provisions for both bottom flush or face mounting. Centerline distances are minimized, facilitating side-by-side cylinder mounting.
· Body — 304 Stainless Steel.
· Heads — Anodized Aluminum Alloy.
· Piston Rod — Ground and Polished 303 Stainless Steel.
· Piston Seals — Buna N (High temperature seals optional).
· Rod Bushing — Bronze.
· Rod Seals — Buna N Block V (High temperature seals optional).
· Tie Rods — 303 Stainless Steel.
· Rod End Block — Anodized Aluminum Alloy.
· Pressure Rating — 200 PSI Maximum (Air only).
· Temperature Rating — From -20°F to +150°F (-25°C to +65°C) Buna N seals with a temperature range of -20°F to +150°F (25°C to +65°C) are standard in all Bimba air cylinders. Fluoroelastomer seals rated for higher temperature applications are available. If cylinders are operated below 0°F (-18°C) for extended time periods, special modifications may be required.
· Special seal materials are available upon request!
· Square Flat-II nonrotating, double acting cylinder provides the answer to applications where rotation cannot be tolerated.
· Nonrotation is achieved with dual piston rods and a rod end block that insures the rods work in tandem. Eliminates the need for external alignment devices. It also provides a convenient alternative for horizontal and side mounting, with provisions for both bottom flush or face mounting. Centerline distances are minimized, facilitating side-by-side cylinder mounting.
· Body — 304 Stainless Steel.
· Heads — Anodized Aluminum Alloy.
· Piston Rod — Ground and Polished 303 Stainless Steel.
· Piston Seals — Buna N (High temperature seals optional).
· Rod Bushing — Bronze.
· Rod Seals — Buna N Block V (High temperature seals optional).
· Tie Rods — 303 Stainless Steel.
· Rod End Block — Anodized Aluminum Alloy.
· Pressure Rating — 200 PSI Maximum (Air only).
· Temperature Rating — From -20°F to +150°F (-25°C to +65°C) Buna N seals with a temperature range of -20°F to +150°F (25°C to +65°C) are standard in all Bimba air cylinders. Fluoroelastomer seals rated for higher temperature applications are available. If cylinders are operated below 0°F (-18°C) for extended time periods, special modifications may be required.
· Special seal materials are available upon request!
0 comments:
Post a Comment